Pipeline Repair

Get A Quote

STOP IT® Emergency Leak Control Kits

First Response™ Leak Repair Kit
The First Response™ Leak Repair Kit provides everything needed for maintenance and safety teams to respond quickly to most common
leaks, cracks, and gashes in pipes, tanks and drums.

Each kit includes
• A small, medium, and large size of the STOP IT® Pipe Repair System
• Five Fix Stix™ epoxy units
• 18 assorted wooden plugs
• Rubber hammer
• Two Plug-N-Dike™ Plug Rugs
• Three Plug Patties
• Lead wool filler pack
• Hot/cold hose repair tape

Universal Series – Kits AE and D
Universal kits are designed to plug hazardous material leaks in any type of low-pressure vessel. The kits contain everything needed to respond to leaks in tanks and drums. The wide variety of sealing devices and materials address surface holes of all shapes, as well as cracks and gashes. All bolts, back-up plates, and hardware is constructed from 304 stainless steel. Accompanying tools are available in standard or non-sparking versions.

Kits AE and D contain
• Two toggle-bolt ball plugs
• Six toggle-bolt surface plugs
• Two T-bolt crack patches
• Five self tapping screw patches
• Nine assorted wooden plugs
• Fix Stix™ epoxy
• Plug-N-Dike™ Plug Pattie
• Lead wool filler pack
• Hot/cold hose repair tape

• Sorbent pad
• Tubeless tire repair kit
• 8” x 12” solid neoprene and 20” x 20”
closed-cell foam gasketing material
• Steel drift pin
• OSHA approved 200’ roll of
barricade tape
• Tools for installing all patches
• Heavy duty carrying case

Kit AE: Contains items for larger holes, cracks and gashes in addition to the standard items listed above. These include one 8” x 12” stainless steel plate lined with 3/4” thick soft neoprene material and three T-bolts with preassembled wingnut washer combos. A second 8” x 12” stainless steel neoprene backed plate is included with hardwood cribbing ladder patch and two 22’ heavy-duty nylon straps.

Kits C-2 and C-3: These versatile clamps respond to water, wastewater, fuel, chemical, air and gas leaks.

Series C-2: Contains ten assorted clamps for 1/2” through 4” diameter pipe, extra gasketing material and installation tools. Clamp sizes are 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”, 3 1/2”, 4”.

Series C-3: Contains three large clamps for 5”, 6” and 8” diameter pipe, extra gasketing material and installation tools. Clamp sizes are 5”, 6” and 8”.

Kit F: Designed to patch a large hole, crack, or gash in a large vessel or tank. The kit has a patch that conforms to the curvature of the vessel and the patch uses a variety of T-bolts to support itself directly to the hole. The leak is then sealed by tightening the compression bolts around the frame, conforming the patch to the vessel.

National Headquarters:
New Jersey
411 Elizabeth Avenue
Somerset, NJ 08873

Mailing Address:
P.O. Box 476
So. Bound Brook, NJ 08880
Email: info@stuartsteel.com
Phone: 732-469-5544
Fax: 732-469-9270

Warehouse Addresses:
Tennessee
1005 Main Street
Humboldt, TN 38343

Georgia
66 Southern Court
Hiram, GA 30141
678-903-6151

© Stuart Steel Protection.
All Rights Reserved.
Terms of Use
Website by Asenka