Type JB

(.01 Ohm, 5 Ampere, 50 Millivolt, Manganin Shunt)
This is a 0.01 ohm, 8 ampere capacity manganin strip shunt designed for use in junction boxes. Size is 1/2″ x 3-3/4″. Standard hole size is for #10 (3/16″) screws. Optional hole size for 1/4″ screws is available. Hole spacing is 3-1/4″.

Type RS

(.01 Ohm, 5 Ampere, 50 Millivolt, Manganin Wire Shunt)
This 0.01 ohm shunt is rated at 6 amps and is made from #12 manganin wire. With a overall length of 5-3/4″, the shunt can be bent to fit into small areas. The RS shunt is used for junction boxes, test stations and similar applications.

Type SO

(50 Ampere, 50 Millivolt, Manganin Shunt)
This is a 0.001 ohm shunt is rated at 50 amps and is constructed of #4 manganin wire and 1/4″ x 1/2″ x 1-1/8″ brass end plates for mounting. Mounting holes in the brass plates are made for 1/4″-20 screws and are on 3-3/8″ centers. 10-32 screws are provided for permanent lead connections.

Type SS

(.001 Ohm, 25 Ampere, Ribbon Shunt)
This is a 0.001 ohm shunt is rated at 25 amps and is constructed of copper nickel alloy ribbon. Provided mounting holes are on 2-3/4″ centers for a 3/8″ bolt.10-32 screws are provided for permanent lead connections.

Type SW

(50 Millivolt, Holloway Panel Shunt)
This is a 50 millivolt panel shunt which can be ordered in a variety of amperage ratings up to 200 amp. Resistance varies according to amperage rating. Potential screws are #6. Holes are for 1/4″ bolts and spacing is 2 1/2″.