You are here: Products > Flange Protection & Isolation Fittings

Pipe Supports

Pipe Supports

CLOCK SPRING® PS
Pipe Support

Clock Spring® Pipe Support (PS) provides effective protection at support or hanger locations and can be applied quickly and easily – requiring no special tools or training. The composite sleeves form a sacrificial wear surface to protect the pipe from wear and corrosion

Clock Spring® PS is a high strength corrosion resistant fiberglass and resin composite sleeve, a high performance adhesive and a filler material. The composite split sleeves are uniquely shaped and sized to wrap around pipe diameters (1320.8 mm). The individual layers are bonded together and to the pipe resulting in a laminate thickness of approximately 0.125-inches (3 mm).
of 0.75" (19 mm ) to 52"

Clock Spring repairs are fast, economical, safe and easy. Since no cutting or welding is required, there is no risk to the pipeline or environment, no release of greenhouse gases or waste disposal issues.

 

 

 

I Sleeve Specifications  
  Use Designed as a full encirclement wrap to provide a
wear surface and eliminat e crevice corrosion the
pipe / support interface.
  Number of Wraps 3 wraps standard configuration Can be varied depending on specific application.
  Application Temperature 0° F – 170° F (-18° C – 77° C)
  Service Temperature -20° F – 170° F (-29° C – 77° C)For temperatures below contact manufacturer.
  Material E-glass and Polyester resin
  Width 11.5" ± 0.5" (292 mm ± 13 mm)
II    
  Adhesive Specification  
  Lap Shear Strength >1200 psi (8.27 MPa)
  Shelf Life 12 months from date of manufacture
     
III. Filler Specification  
  Compressive strength >8000 psi (55 MPa)
  Shelf Life  12 months from date of manufacture
     
IV. Activator Specification  
  Shelf Life 12 months from date of manufacture
Refrigeration at 38-52° F (3-11° C) will extend
material shelf life an additional 3 months.

 

 

 

Back