"Chill Cast" in Metal Molds
- Assures consistent weight, greater density less flake graphite grain boundary, and lower chemical segregation than Sand Cast Anodes.
- ANOTEC Chill Cast structure is similar to "Spin Cast" Tubular Anodes.
- Independent laboratory tests confirm that Anotec Anodes withstand drop impact tests to more than twice the height of Sand Cast Anodes.
- ISO 9001 Quality Control assures: chemistry (by spectrometer), impact strength and production lot traceability.
- Accelerated Corrosion Tests confirm that Anotec Chill Cast anodes perform significantly better (up to 19%) than Sand Cast anodes in chloride and sulphate environments. Test reports available on request.
- Spherical Tip prevents hang-up when lowering into deep wells.
A dense skin of minute columnar grains and a dense core of equiaxial grains.
Occasionally, very fine interdendritic porosity at center. Predominantly spheroidal shaped graphite. Similar to the structure of vacuum refined High Silicon Iron.
.jpg)
| Anotec Type |
D(in.) |
L(in.) |
A(in.) |
Weight(lbs.) |
Area(ft.²) |
Anodes/Crate |
Gross lbs. |
| SHA |
2 |
60 |
2.2 |
43 |
2.6 |
50 |
2300 |
| EHA |
2 |
60 |
3 |
44 |
2.7 |
50 |
2350 |
| EHM |
2.1 |
60 |
3 |
60 |
2.8 |
45 |
2850 |
| EHK |
1.5 |
60 |
2.2 |
26 |
2 |
70 |
1970 |
| EMK |
1.5 |
60 |
2.2 |
27 |
2.1 |
60 |
1770 |
| EHR |
3 |
60 |
4 |
110 |
4 |
24 |
2790 |
|
Download a PDF