You are here: Products > Instruments

Digital Potential Meter

Digital Potential Meter

Model DPM Digital Electronic Potential Meter
For Electrolysis, Corrosion and Cathodic Protection Testing

 

 

 

Model DPM Potential Meter:

 

 

 MODEL DPM DIGITAL POTENTIAL METER FOR ELECTROLYSIS, CORROSION AND CATHODIC PROTECTION TESTING...Designed for use by non-technical personnel. such as crews, service technicians, meter readers, etc., but also suitable for the most experienced engineers and staff.

 

 20 MEGOHMS INPUT RESISTANCE...
Practically eliminates low potential readings caused by resistance in the external circuit due to contact resistance of the referenceelectrode. This condition is frequently encountered in city work and in frozen ground.

 FEATURES:
• Low cost
• Rugged
• Easy-to-use
• Structure to earth potentials
• ± 2V; ± 20V ranges
• Electrode extension optional
• Low battery display

 SPECIFICATIONS:

• Large 1/2" LCD numbers
• Weatherproofed with neoprene gasket
• 20 megohms input resistance
• Solid state impedance amplifier
• Operates on 1 small 9V transistor battery
- Low drain - practically shelf life
- Battery easily replaced and readily available
• Automatic low battery indicated on display
• Push one button to read ± 2V; push two buttons to read
± 20V while taking reading
• Digital readout: ± I.999V; ± 19.99V
• Molded polycarbonate housing
• Filter eliminates errors caused by AC. Up to 501, 50/60 Hz
• Operating temperature: -4°F to 185°F
• Plastic carrying case with resilient padding
• Modular construction
• Weight: approx. 3 Ibs. Size: 2 1/2" deep by 10" long

 

 

Back