You are here: Products > Anodes - Impressed Current

Anotec High Silicon Stick Anodes

Anotec High Silicon Stick Anodes

"Chill Cast" in Metal Molds

  • Assures consistent weight, greater density less flake graphite grain boundary, and lower chemical segregation than Sand Cast Anodes.
  • ANOTEC Chill Cast structure is similar to "Spin Cast" Tubular Anodes.
  • Independent laboratory tests confirm that Anotec Anodes withstand drop impact tests to more than twice the height of Sand Cast Anodes.
  • ISO 9001 Quality Control assures: chemistry (by spectrometer), impact strength and production lot traceability.
  • Accelerated Corrosion Tests confirm that Anotec Chill Cast anodes perform significantly better (up to 19%) than Sand Cast anodes in chloride and sulphate environments. Test reports available on request.
  • Spherical Tip prevents hang-up when lowering into deep wells.
     


A dense skin of minute columnar grains and a dense core of equiaxial grains.
Occasionally, very fine interdendritic porosity at center. Predominantly spheroidal shaped graphite. Similar to the structure of vacuum refined High Silicon Iron.
 

Anotec Type D(in.) L(in.) A(in.) Weight(lbs.) Area(ft.²) Anodes/Crate Gross lbs.
SHA 2 60 2.2 43 2.6 50 2300
EHA 2 60 3 44 2.7 50 2350
EHM 2.1 60 3 60 2.8 45 2850
EHK 1.5 60 2.2 26 2 70 1970
EMK 1.5 60 2.2 27 2.1 60 1770
EHR 3 60 4 110 4 24 2790

    

 

SKU#:
Quantity:
Back